No ratings yet

Peanut chutney comprises roasted peanuts, onion, and other ingredients. It is tempered with cumin and mustard seeds, urad dal, and curry leaves for boosted flavor. Join me on this culinary journey and follow my simple recipe to know the steps to make peanut chutney at home.

Table of Contents

KEY TAKEAWAYS

Peanut chutney is easy to make at home.

Store it in the fridge in a moisture-free container.
Serve the chutney with South Indian dishes or pair it with sandwiches, poha, or rotis.
Peanut chutney offers a nutty and spicy taste with a tangy and earthy undertone.

Adding any of these ingredients like coconut, onion, mint, tomato, and chili with peanut will offer a somewhat similar taste as pure peanut chutney.

I discovered peanut chutney at an anniversary party of a family friend. The tadka topping on the rich creamy peanut chutney was like the icing on a cake which enhanced the taste of the chutney manifold. Inspired, I tried to make it for lunch one Sunday while my niece came over. It turned out to be so nice that my niece wanted me to make it for her upcoming birthday party. I felt so happy and proud that my peanut chutney recipe was appreciated by all at the party.

How to Make Peanut Chutney? (Step by Step Guide with Images)

Step 1: Take a wok or a frying pan and heat it on a medium flame on your gas stove. When it is hot, put 1 cup of peanuts in it. Stir continuously for about 5 to 6 minutes to dry roast the peanuts on a medium-low flame until they are fully brown in color.

(Pro tip: If you do not want or have the time to roast the peanuts, you can skip this step and use store-bought, pre-roasted peanuts in its place).

Step 2: When you see that the peanuts have turned to a lovely dark-brown color, that is what you need. Turn the flame of your gas stove off. Transfer them from the wok to a wide tray and set it aside to cool them down completely.

Step 3: While the peanuts are cooling down, add about 3 tsp of white oil in the pan to sauté a few other ingredients for the chutney. When the oil is hot enough, put 1 large piece of onion, finely chopped, in it. Follow it with 8 pieces of fresh and deskinned garlic cloves. Then, add 8 pieces of dry red chilies in it.

(Pro tip: If you want your peanut chutney to be spicier, add more red chilies to it. If you want less, reduce the number of red chilies).

Step 4: Sauté the ingredients for a few minutes until the onions turn translucent and the other ingredients are not raw anymore.

Step 5: At this point, add 1 piece of tamarind the size of a gooseberry. Make sure to break the tamarind into small pieces. Sauté all the ingredients again for a couple of minutes more until everything is cooked nicely and the onions look nice and juicy.

Step 6: Once the cooking process is done, turn off your gas stove, transfer the ingredients from the frying pan to a bowl, and set it aside to cool down completely.

Step 7: Now, while these ingredients are cooling down, you will have to remove the skin from the roasted peanuts. Use your hand first to crush them gently. Then rub them in your hand. The loose skin will come off easily.

Step 8: Hold the tray forward, blow from your mouth and the skin will be separated easily.

(Pro tip: You may perform this step near the window or outside your kitchen so that your kitchen does not become dirty with peanut skins scattered all over. However, I didn’t).

Step 9: While removing the skin, if you feel that the peanuts are still hot, transfer them from the tray to a bowl and keep them aside for some more time so that they cool down even further at room temperature.

Step 10: When all the ingredients have cooled down completely, take a clean grinder and transfer the roasted peanuts to it first.

Step 11: Then, transfer the fried ingredients to the grinder.

(Pro tip: Do not rush things and transfer them to the grinder if the ingredients are even slightly warm. The heat will eventually affect the taste and flavor of the chutney).

Step 12: Now, to the ingredients in the grinder, add 1 tsp of rock salt.

Step 13: Grind the ingredients, first without adding any water in the grinder, into a somewhat coarse powder. Add a little bit of water to it and grind it again.

(Pro tip: The grinder may find it difficult to rotate freely at this point. Do not worry).

Step 14: Now, add some more water and grind it all over again to make a paste, now with much ease and a relatively smoother texture.

(Pro tip: Make sure that you do not grind the ingredients too smooth. It should be a bit coarse because you will have to grind it a couple of times more. It is only in this way you will get to enjoy the desired texture of your peanut chutney).

Step 15: Check the texture. It should be done by now. If not, add some more water if needed and grind it again to get a nice and smooth paste.

(Pro tip: Always add water in a small amount and grind every time after it. This will help you achieve the desired consistency. Remember, if it is too thick, you can add more water. But if it is runny, you cannot take it back).

Step 16: Mix the paste nicely. Check that the consistency is perfect.

Step 17: When you are satisfied with the texture, transfer the peanut paste from the grinder to a bowl and keep it aside.

Step 18: Now, to complete making the peanut chutney, you will need to prepare the tempering ingredients. Take a tadka pan, heat it, and put about 2 tsp of white oil in it.

Step 19: When the oil is heated up, add 1 tsp of split black gram lentils (urad dal) in it.

Step 20: Then add 1 tsp of mustard seeds to it.

Step 21: Also add 1 tsp of cumin seeds to the hot oil.

(Pro tip: At this point, you should be careful because the mustard seeds and cumin seeds will start crackling, and sprinkle hot oil around).

Step 22: Now, once these seeds stop splattering, indicating that they are quite cooked, add 3 pieces of dry red chilies to the pan. You may break them in half.

Step 23: Follow it with 1 tsp of asafetida.

Step 24: Finally, add 8 to 10 pieces of fresh curry leaves to the tempering ingredients in the tadka pan.

Step 25: Sauté everything for a few seconds until the curry leaves are cooked nicely and are raw no more.

Step 26: Transfer a portion of the prepared tempering to the bowl containing the peanut paste immediately.

Step 27: Mix the tempering with the chutney nicely.

Step 28: Finally, put the remaining tempering ingredients to the bowl and your tasty, irresistible, homemade peanut chutney is ready to be served with some hot idlis, dosas, and a variety of other dishes and snacks.